Linux-based FROG-I robot thinks its a dinosaur

The Chinese Academy of Sciences demonstrated a quadruped robot intended to test gait control and locomotion -- and eventually mimic the movement of a triceratops. The flexibly jointed, 3.1-foot FROG-I robot runs Linux on an Intel Xscale PXA270 processor, communicating via Wi-Fi with a host computer, while lower-level functions are controlled by two Texas Instruments DSPs.

FROG-I (Four-legged Robot for Optimal Gaits) was developed by Dr. Wei Wang and a team of researchers at the Chinese Academy of Sciences, in Beijing, working out of the Institute of Automation's Field Robotics Group. The robot is intended as a research platform for studying gait control, gait transition, and other locomotion algorithms.

FROG-I prototype, with power tether trailing The prototype was recently demonstrated in a YouTube video, shown farther below. Wang has also posted a detailed English-language website about FROG-I (see links at end of story).

FROG-I is intended as prototype for a robot that will mimic the living endoskeleton of a triceratops, according to a story in IEEE Spectrum. Wang received a desk model of the horned dinosaur (pictured at left) from a film director, who hopes to use FROG-I's triceratops descendant in a dinosaur movie. Meanwhile, Wang told the publication, "I hope it can find entertainment applications in dinosaur museums or expos."

At first glance, FROG-I seems to be a cousin of Boston Dynamics' Big Dog, another ambulatory quadruped robot. However, as seen in the video, while FROG-I is capable of stepping over obstacles, it is a much slower moving beastie, lacking Big Dog's hydraulics or ability to hump heavy loads.

FROG-I's PXA-270 driven controller board A real-time Linux-based embedded controller (pictured above) equipped with an Intel/Marvell XScale PXA270 processor performs control and sensing, says the project. The controller also communicates with a host computer via Wi-Fi.? The controller works in conjunction with two Texas Instruments (TI) digital signal processors (DSPs) -- the TMS320DM642 DaVinci and TMS320f2812 -- to process video signals from various sensors connected via a CANOpen bus, says the project.

The DSPs are said to control the robot's pan tilt camera and actuated joints, while also processing signals from various sensors. These include joint angle, foot contact, ultrasonic, axis acceleration, and gyro sensors.

Measuring about 3.8 feet long by 3.1 feet tall by 2.3 feet wide (1150 x 950 x 700mm to be precise), FROG-I weighs in at 121 pounds (55 kilos). Each leg contains one hip pitch joint and one knee pitch joint, each of which is powered by DC motors, says the project.

FROG-I also sports a passive compliant prismatic DOF (degrees of freedom) controller at each toe. The robot is currently powered by a tethered DC48V 18A power supply.

FROG-I is further equipped with various specialized software controllers including central pattern generator (CPG), gait transition, inverse dynamics control, geology adaptation locomotion, and trajectory planning components. A key research goal is to develop trajectory planning and control techniques to allow jumping over obstacles and crossing ditches, says the project.

FROG-I's first steps, on YouTube
Source: IEEE Spectrum
(Click to play)

Availability?

More information on FROG-I may be found at the Chinese Academy of Sciences Institute of Automation FROG-I website. The IEEE Spectrum story may be found here.

---

Related Stories:

Source: http://www.linuxfordevices.com/c/a/News/FROGI-robot-demod/?kc=rss

tampa bay lightning blazers billy graham mla format chelsy davy